DJI Action 2

• A- 4K (4:3):4096×3072 @ 24/25/30/48/50/60fps
• 4K (16:9):3840×2160 @ 100/120fps
• 4K (16:9):3840×2160 @ 24/25/30/48/50/60fps
• 2.7K (4:3):2688×2016 @ 24/25/30/48/50/60fps
• 2.7K (16:9):2688×1512 @ 100/120fps
• 2.7K (16:9):2688×1512 @ 24/25/30/48/50/60fps
• 1080p:1920×1080 @ 100/120/200/240fps
• 1080p:1920×1080 @ 24/25/30/48/50/60fps

A- MP4 (H.264 / H.265)

Yes. DJI Action 2 supports distortion correction. The front touchscreen module and power module support using microSD card (with a capacity of up to 256 GB).

Photos from Timelapse can be downloaded and viewed on a computer.

DJI Action 2 uses RockSteady technology to stabilize footage. This EIS technology is realized by increasing the shutter speed, analyzing the images captured by the CMOS sensor, and compensating by cutting off the edges of these images. In this way, multiple frames are overlaid and finally combined into a single frame that is sharp, clear, and accurately exposed.

HorizonSteady uses DJI’s latest stabilization algorithm to lock onto a leveled horizon in every frame, regardless of how the camera is mounted or worn. It allows you to capture smooth and stable footage whether you are cycling on bumpy roads or go-karting around a track.

Yes. DJI Action 2 supports up to 1080p/240fps 8x slow motion videos.

It is designed to capture a wide dynamic range from the sensor, and colors are distributed evenly so the dark part of a picture is greatly improved. It is not a real LUT, but a lower-contrast video with a flat color profile, great for post-processing options.

Method 1: Connect to the DJI Mimo app and download the content to your phone.

Method 2: Insert the microSD from DJI Action 2 into a computer.

Method 3: Connect DJI Action 2 to a computer with a USB-C cable.

Yes. With a prime lens, subjects are clear when they are more than 300 mm away from the lens.

DJI Action 2 supports evaluative metering but not spot metering.

The DJI Mimo app allows you to control DJI Action 2, sync photos and videos, edit, and share.

• Scan the QR code displayed on the camera unit screen, or download the DJI Mimo app from the app store.
• Press the power button to turn on the device.
• Open the DJI Mimo app, tap the camera icon at the upper left corner of the home page, enable Bluetooth and Wi-Fi according to the prompts, select the correct Wi-Fi, and tap to connect to DJI Action 2.
• After the DJI Mimo app is connected to DJI Action 2, you will be prompted to activate the device.
• Complete the activation process by following the prompts in the app.

The DJI Mimo app will send push messages automatically. Follow the prompts to complete the update process.

Tap to turn on and unlock the front or back touchscreens. You can use the menu to show the front and back screens simultaneously or just one screen.

Yes.

In photo mode, rotate DJI Action 2 by 90° and the system will automatically change to Portrait mode.

Yes. DJI Action 2 supports voice commands in English and Mandarin Chinese.

The lock screen function prevents you from touching the screen accidently, especially when you use it underwater.

You can either save the videos on your phone first or use the DJI Mimo app to upload them and share the links generated.

Method 1: Enter camera view, and swipe the touchscreen to the left to access camera parameter settings, and choose Manual (M) mode.

Method 2: Connect with the DJI Mimo app and tap Settings on the left of the camera view.

Yes. Press and hold the power button on DJI Action 2 to enter sleep mode. The camera will automatically power off after 60 minutes in sleep mode.

Yes. You can connect DJI Action 2 with a third-party microphone through the USB-C port via the 3.5mm adapter.

You can set the playback volume when DJI Action 2 is attached with a Front Touchscreen Module.

The status LED on the front touchscreen module or the power module turns on during charging when powered off. The battery is fully charged when the status LED displays solid green for six seconds and turns off. It takes approximately 90 minutes to fully charge both the camera unit and the front touchscreen module or the power module when they are connected. (* Measured using a 5V/2A USB adapter in a laboratory environment. Use as a reference only.)

No. DJI Action 2 does not support PD and QC fast charging protocols. Please use a 5V/2A charger to charge the device.

DJI Action 2 is compatible with the following accessories: Front Touchscreen Module, Magnetic Lanyard, Magnetic Ball-Joint Adapter Mount, Magnetic Adapter Mount, Power Module, Magnetic Headband, Remote Control Extension Rod, Macro Lens, DJI Mic, Waterproof Case, and DJI Floating Handle. The Front Touchscreen Module, Magnetic Lanyard, Magnetic Ball-Joint Adapter Mount, and Magnetic Adapter Mount are included in the box. All other accessories must be purchased separately.

• Some accessories such as the Front Touchscreen Module or Power Module can be attached directly to DJI Action 2 via the magnetic lock.
• Remove the bottom cover of the Magnetic Ball-Joint Adapter Mount, and attach accessories via the 1/4″ screw hole.
• With the Magnetic Adapter Mount and a threaded rod (not provided), you can mount third-party action camera accessories to DJI Action 2.

Yes. The camera can be mounted to a tripod or other accessories via the 1/4″ screw hole at the bottom of the Magnetic Ball-Joint Adapter Mount.

DJI Action 2 is waterproof, unless used with the Front Touchscreen Module or Power Module.

The Front Touchscreen Module, Power Module, Magnetic Ball-Joint Adapter Mount, and Magnetic Adapter Mount all have a built-in magnetic lock that ensures a firm connection between units in active motion scenarios.

The Magnetic Lanyard and Magnetic Headband use an attachment plate that is more suitable for daily lifestyle scenarios. The Macro Lens magnetically connects directly to the camera. Activities involving strenuous movements should be avoided when using these accessories.

Yes. The adhesive base of the Magnetic Ball-Joint Adapter Mount will regain its adhesiveness when washed with water.

No, but you can magnetically attach the Macro Lens or other third-party lenses or filters to the camera.

Yes.

Yes. DJI Action 2 can be used at depths of up to 10 meters, and up to 60 meters by using the DJI Action 2 Waterproof Case.

Recommended Models:

1. Samsung EVO 128GB UHS-I Speed Grade 3 microSDHC
2. Samsung EVO Plus 128GB UHS-I Speed Grade 3 microSDXC
3. SanDisk Extreme 64GB V30 A2 UHS-I Speed Grade 3 microSDXC
4. SanDisk Extreme Pro 32GB UHS-I Speed Grade 3 microSDXC
5. SanDisk Extreme 16GB UHS-I Speed Grade 3 microSDXC
6. Lexar 1066x 64GB UHS-I Speed Grade 3 microSDHC
7. Kingston Canvas React Plus 64GB UHS-II Speed Grade 3 microSD
8. Kingston Canvas Go!Plus 64GB UHS-I Speed Grade 3 microSD

• Dirt on the lens can be cleaned with a lens cleaning cloth. For dust in the cracks at the edge of the lens, use a dust blower or cotton swab for cleaning.
• To clean water stains, oil smudges, or fingerprints on the lens, apply a few drops of lens cleaning solution on lens tissues and use a circular motion.

DJI Action 2 is dust-proof. However, if dust does get inside the device and cannot be cleaned, please contact DJI After-Sales for repair.