DJI Mic (2 TX + 1 RX + Charging Case)
- All-in-One Ready to Use
- 250m (820 ft.) Range
- 15-Hour Battery
- Magnetic Attachment
- OLED Touchscreen
- 14-Hour Recording
- Suitable for Coordinated Recording
Take a Closer Look
The transmitter has a convenient back clip and magnetic design for easy attachment to clothes, ensuring it's always ready for instant use.
Up to 250m (820 ft.) audio transmission range is supported in open, unobstructed environments without interference. Cable-free, hassle-free.
The receiver has a built-in 0.95-inch OLED touchscreen that provides intuitive access to different operations.
Up to 250m (820 ft.) audio transmission range is supported in open, unobstructed environments without interference. Cable-free, hassle-free.
The receiver has a built-in 0.95-inch OLED touchscreen that provides intuitive access to different operations.
Enjoy 5.5 hours of battery life from the transmitters, and up to 15 hours with the charging case.[3]Spend less time worrying about battery level.
With 8 GB of internal storage, record up to 14 hours of compressionless 48kHz 24-bit audio and output files quickly to a computer via data cable.
Let’s Answer Your Questions
What is the difference between DJI Mic (1 TX + 1 RX) and DJI Mic (2 TX + 1 RX + Charging Case)?
Compared with DJI Mic wireless microphone (2 TX + 1 RX + Charging Case), DJI Mic wireless microphone (1 TX + 1 RX) includes only one DJI Mic transmitter and does not include the charging case. The storage bag and charging cable are also slightly different. The rest of the accessories are the same.
DJI Mic (1 TX + 1 RX) is suitable for solo operators to take vlogs or do livestreaming. A operating time of 5 hours is enough for needs like store visiting, vlogging and teaching online class. The price is also more affordable. In the meantime, DJI Mic (2 TX + 1 RX + Charging Case) is more suitable for scenarios with two speakers, such as livestreaming, interview or video shooting. The two transmitters can record at the same time, and with the charging case, the operating time extends to 15 hours, meeting complicated creative needs like long videos and micro films that might take longer time.
What can I use DJI Mic with?
You can use DJI Mic wireless microphone with a range of devices, including cameras, smartphones (only Lightning and USB-C ports are supported), computers, Osmo Action 3, and Osmo Mobile 6.
Do I need to activate DJI Mic?
DJI Mic wireless microphone is ready to use without activation. Get registered on the official DJI website and you can get a one-year warranty extension.
What’s the difference between Mono and Stereo?
DJI Mic wireless microphonesupports two recording modes: Mono and Stereo. Under Stereo mode, audio from the two transmitters can be recorded via separate channels, and under Mono mode, audio will be recorded via one channel. As Stereo requires two channels, DJI Mic (1 TX + 1 RX) does not support stereo.
How long does it take to fully charge the transmitters and receiver using the Charging Case? How long does it take to fully charge the Charging Case?
At room temperature, it takes about 1 hour and 10 minutes to fully charge the transmitters and receiver using the Charging Case. It takes about 2 hours and 40 minutes to fully charge the Charging Case.
Where can I mount DJI Mic transmitters?
It is recommended to use the Back Clip to attach DJI Mic to locations such as a shirt collar, or it can be used with the Clip Magnets.
Note: If you need to put the transmitters on any flat surface, use the Clip Magnets to make them stand upright.
How do I link the transmitters with the receiver?
DJI Mic transmitters and receiver are already linked by default. If you need to link them again, you can do so in the following ways:
Method 1: Put the receiver and transmitters into the charging case and they will pair automatically. This method only applies to DJI Mic (2 TX + 1 RX + Charging Case).
Method 2: Turn on the receiver and transmitters. Scroll the screen of the receiver downward to enter the control center page. Slide to the left and tap “Settings” to enter the settings page. Slide to the left again and tap “Link” to enter linking mode. Then, press and hold the link button on the side of the transmitters until the green light on the top-left corner flashes and wait for the linking to finish. When the linking indicators of the transmitters turn solid green, it means the linking is successful. This method applies to both DJI Mic (2 TX + 1 RX + Charging Case) and DJI Mic (1 TX + 1 RX).
Do the transmitters support standalone recording? If yes, what is the max recording time?
Yes. DJI Mic transmitters support standalone recording. Press the recording button on the side of the transmitters. A solid red light indicates that recording has started. When fully charged, it can record for up to 5.5 hours. With a constant power supply, it can record up to 14 hours of 24-bit lossless audio.
Note: Audio will be saved as one file for every 30 minutes during standalone recording. When internal storage space runs out, new audio will replace the earliest ones, and new files will also be saved every 30 minutes.
What is the internal storage of DJI Mic transmitters? Do the transmitters support external SD cards for storage?
DJI Mic transmitters have built-in 8GB storage and do not support external storage.
How do I connect the DJI Mic Receiver with my smartphone, camera, or computer?
To connect with a smartphone: Insert the standard phone adapter into the pogo-pin port at the bottom of the transmitters and connect with your phone. Start shooting or recording on your phone and the receiver will start working.
To connect with a camera: The receiver can be mounted on a camera via the hot shoe adapter. Use a 3.5mm camera connection cable to connect the camera mic port and the 3.5mm audio output port on the receiver. Then, start recording videos on your camera and the receiver will start working.
To connect with a computer: Use a 3.5mm camera connection cable to connect the mic port of your computer with the 3.5mm audio output port of the receiver. Start recording on your computer and the receiver will start working.