DJI RS 3 Pro

Tap the gimbal calibration icon on the touchscreen of the gimbal and enable SuperSmooth mode*. Tap Start Calibration to perform calibration for better stabilization.

* Before using SuperSmooth mode
make sure you have installed the lens-fastening support.

SuperSmooth mode was developed for fast-moving scenarios. It increases the torque of DJI RS 3 Pro to further enhance stabilization, delivering stable footage in more dynamic and strenuous shooting scenarios.

One.

You can use the joystick on the grip to control the gimbal and compose your shot.

Inheriting the design language of DJI RS 2, DJI RS 3 Pro features extended carbon fiber axis arms, new automated axis locks, a gimbal mode switch, Bluetooth shutter control, as well as a 1.8-inch full-color OLED touchscreen, making shooting more efficient and convenient. The optimized structure of RS 3 Pro ensures that its weight remains at 1.5 kg (this weight includes the gimbal, battery grip, and dual-layered quick-release plates), while its load capacity is a robust 4.5 kg. In addition, DJI RS 3 Pro is equipped with the 3rd-Gen RS Stabilization Algorithm that supports LiDAR focusing and O3 Pro video transmission technologies, delivering an integrated receiving, monitoring, and control experience that facilitates coordinated shooting.

Follow the steps below to activate the device:

1. Press and hold the power button to power on the gimbal.
2. Enable Bluetooth on your mobile device.
3. Launch the Ronin app and register or log in with your DJI account. Select DJI RS 3 Pro on the device list, enter the default password: 12345678, and follow the on-screen instructions to activate DJI RS 3 Pro.*
4. DJI RS 3 Pro will enter sleep mode after successful activation. Press the power button once to exit sleep mode before use.

* During activation, make sure the mobile device is connected to the internet.

Follow the steps below to update the firmware:

1. Press and hold the power button to power on the gimbal.
2. Launch the Ronin app, tap Connect to Gimbal, and select your DJI RS 3 Pro on the device list.
3. When new firmware is available, there will be a prompt on the top of the Ronin app main page that says “Update Now.”* Simply tap it. There will be a prompt to indicate that the update has been successful. Tap Exit to complete the update.
4. If the update fails, restart the device and try again.

* Do not power off the gimbal or exit the app until the firmware update is complete.

No. Ports on DJI RS 3 Pro are not waterproof or dustproof. Please stay away from water and dust during use to avoid damaging the device.

DJI RS 3 Pro is primarily composed of aluminum alloy and carbon fiber.

Please refer to the Ronin Series Compatibility Search: https://www.dji.com/support/compatibility

1. Power Button
Press and hold: Power on/off;
Press once: Sleep/wake.
2. Trigger
Press and hold: Enter Lock mode;
Press twice: Recenter the gimbal;
Press three times: Enter Selfie mode.
3. Front Dial
Electronic focusing (default setting).
4. Camera Control Button
Press halfway: Autofocus;
Press once: Start/stop recording;
Press and hold: Take a photo.
5. Joystick
Push up or pull down: Control tilt axis movement (by default);
Push left or right: Control pan axis movement (by default).
6. M Button
Press once: Can be customized to lock/unlock the touchscreen, take a photo, or LiDAR AF/MF;
Press and hold: Enter Sport mode;
Press and hold while pressing the Trigger twice: Lock Sport mode. Repeat to exit;
Press and hold the M Button and Trigger: Start auto calibration.

When the gimbal is powered off, press and hold the power button, and the three axes unlock and expand automatically for use within just a few seconds. Press and hold the power button again to lock the axes and power off the gimbal. During use, press the power button once, and the axes automatically lock and enter sleep mode. Press once again to unlock and wake.

Approx. 4.5 kg/10 lbs.

Please refer to the Ronin Series Compatibility Search: https://www.dji.com/support/compatibility

Swipe down the main page of the built-in touchscreen, tap the Bluetooth icon, and DJI RS 3 Pro will start searching for Bluetooth signals of surrounding devices. Select the Bluetooth name of your camera. Certain camera models require a linking password. After successful connection, the Bluetooth icon will turn blue. For detailed steps, watch the tutorial Connecting DJI RS 3/RS 3 Pro.

Press halfway to autofocus, press once to start recording, and press and hold to take a photo.

Please check the appendix: DJI RS Series Universal Accessories List

Use the Ronin Expansion Base Kit to mount DJI RS 3 Pro.

There are three ways to control DJI RS 3 Pro remotely:

1. Pair DJI RS 3 Pro with DJI Transmission to control the gimbal and camera focus remotely with Ronin 4D Hand Grips, DJI Master Wheels, or DJI Force Pro. The DJI High-Bright Remote Monitor can be used as an independent motion controller to remotely control the gimbal.
2. Connect DJI RS 3 Pro to the DJI R Focus Wheel and DJI Pro Wireless Receiver. Link the DJI Pro Wireless Receiver with DJI Master Wheels or DJI Force Pro to remotely control the gimbal via DJI Master Wheels or DJI Force Pro.
3. When using DJI RS 3 Pro with the DJI Ronin Image Transmitter, use Force Mobile or the virtual joysticks in the Ronin app to control the gimbal remotely.

Lens calibration profiles are stored in the DJI RS Focus Motor (2022). After connecting the DJI LiDAR Range Finder (RS) and DJI RS Focus Motor (2022) to the gimbal, you can delete the files on the lens calibration page on the built-in touchscreen.

Three at most.

1. Use a USB-C cable to connect the DJI LiDAR Range Finder (RS) with a computer. Launch DJI Assistant 2 (Ronin Series), and log into your DJI account.
2. Click on the LiDAR range finder icon to enter the firmware update page, and wait for the firmware list to be updated.
3. Select the firmware version you need and click Update. Then, wait for the firmware to be downloaded. After the download, the DJI LiDAR Range Finder (RS) will automatically perform the update.

No. It can only work with manual lenses.

When the DJI LiDAR Range Finder (RS) is connected to DJI RS 3 Pro via the multi-camera control cable, if the display becomes grainy or flickers, use the DJI LiDAR Control Cable to connect the DJI LiDAR Range Finder (RS) with DJI RS 3 Pro.

Up to 12 hours with equipment in a level and stationary state, the gimbal balanced, three axes in an active state, and the battery only powering the gimbal.

Approx. 1.5 hours.*

* Measured with a 24W charger. It is recommended to use QC 2.0 or PD protocol chargers.